Microstructural Deformation Mechanisms and Optimization of Selectively Laser Melted 316L Steel

dc.contributor.authorMoneghan, Matthew Johnen
dc.contributor.committeechairMirzaeifar, Rezaen
dc.contributor.committeememberWilliams, Christopher B.en
dc.contributor.committeememberWest, Robert L.en
dc.contributor.departmentMaterials Science and Engineeringen
dc.description.abstractIn this paper, a novel approach is utilized to investigate the deformation mechanisms at the microstructural level in 3D printed alloys. The complex in-situ heat treatments during 3D printing leaves a unique and complicated microstructure in the as-built 3D printed metals, particularly alloys. The microstructure is made of a hierarchical stacking of some interconnected geometrical shapes, namely meltpools, grains, and cells. These are connected to each other by boundaries that might have different element compositions, and consequently, material properties, compared to the interior region of each geometrical unit. Deformation mechanisms in this microstructure are still highly unexplored, mainly because of the challenges on the way of performing experiments at the micrometer length scale. In this work, we establish an image processing framework that directly converts the SEM images taken from the microstructure of 3D printed 316L stainless steel alloys into CAD models. The model of the complicated microstructure is then scaled up, and the scaled model is 3D printed using polymeric materials. For 3D printing these samples, two polymers with contrasting mechanical properties are used. Distribution of these two polymers mimics the arrangement of soft and stiff regions in the microstructure of 3D printed alloys. These representative samples are subjected to mechanical loads and digital image correlation is utilized to investigate the deformation mechanisms, particularly the delocalization of stress concentration and also the crack propagation, at the microstructural level of 3D printed metals. Besides experiments, computational modeling using finite element method is also performed to study the same deformation mechanisms at the microstructure of 3D printed 316L stainless steel. Our results show that the hierarchical arrangement of stiff and soft phases in 3D printed alloys delocalizes the stress concentration and has the potential to make microstructures with significantly improved damage tolerance capabilities.en
dc.description.abstractgeneralMany researchers have studied the impacts of laser parameters on the bulk material properties of SLM printed parts; few if any have studied how these parts break at a microstructural level. In this work we show how SLM printed parts with complex microstructures including grains, meltpools, and cells, deform and break. The cellular network that occurs in some SLM printed parts leads to a multi-material hierarchical structure, with a stiff network of thin boundaries, and a bulk "matrix" of soft cell material. This leads to similar properties as some composites, whereby the stiff network of cell boundaries leads to increased damage tolerance. We show both computationally through finite element analysis, and experimentally through multi-material 3D fabrication, that the microstructure leads to increased crack length in failure, as well as lower toughness loss and strength loss in the event of a crack. Essentially, the complex nature of the formation of these parts (high heating and cooling rates from laser melting) leads to a beneficial microstructure for damage tolerance that has not been studied from this perspective before.en
dc.description.degreeMaster of Scienceen
dc.publisherVirginia Techen
dc.rightsIn Copyrighten
dc.subject3D Printingen
dc.subject3D Printing Metalsen
dc.subjectAdditive manufacturingen
dc.subjectDefect Toleranceen
dc.titleMicrostructural Deformation Mechanisms and Optimization of Selectively Laser Melted 316L Steelen
thesis.degree.disciplineMaterials Science and Engineeringen
thesis.degree.grantorVirginia Polytechnic Institute and State Universityen
thesis.degree.nameMaster of Scienceen


Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
4.81 MB
Adobe Portable Document Format