VTechWorks staff will be away for the winter holidays starting Tuesday, December 24, 2024, through Wednesday, January 1, 2025, and will not be replying to requests during this time. Thank you for your patience, and happy holidays!
 

Control power requirements for the velocity vector roll

Simple item page
dc.contributor.authorAshley, Patrick A.en
dc.contributor.committeechairDurham, Wayne C.en
dc.contributor.committeememberLutze, Frederick H. Jr.en
dc.contributor.committeememberMason, William H.en
dc.contributor.departmentAerospace Engineeringen
dc.date.accessioned2014-03-14T21:51:35Zen
dc.date.adate2009-12-16en
dc.date.available2014-03-14T21:51:35Zen
dc.date.issued1994-05-04en
dc.date.rdate2009-12-16en
dc.date.sdate2009-12-16en
dc.description.abstractA method for determining the maximum control moments required for an aircraft to perform a velocity vector roll is investigated. The velocity vector roll is assumed to occur at constant angle of attack, constant velocity, and zero sideslip. A simplified set of equations is developed for the non dimensional control moments about the three principal body axes. These equations take on a form well suited for numerical optimization methods. The Schittkowski sap optimization code is used to provide fast, accurate solutions. The numerical method also shows the advantage of being adaptable to changing the airframe and flight performance parameters. An exercise to find the global control moment maxima was performed for a an F-18 with constant aerodynamic derivatives and a load factor of one. The optimization was run for a range of discrete steady state roll rates, roll mode time constants and velocities. The results showed trends for the maxima to occur at the highest steady state roll rate parameter, smallest roll mode time constant and lowest velocity. Each control axis maximum is specific to a particular orientation and angle of attack. For the roll axis, the maximum occurs at nearly zero angle of attack and 270 of wind axis bank angle. The yaw axis maximum occurs at the largest angle of attack (70) and 90 of wind axis bank angle. The pitch maximum occurs near 270 of wind axis bank and 55 angle of attack, but is highly sensitive to the selection of Cma . All control moment maxima occur at a flight path angle of O. The roll and yaw control moment maxima occur upon a maximum roll input starting from rest at the specified orientation and angle of attack. The pitch control maximum occurs at the steady state roll rate when the proper orientation and angle of attack is encountered.en
dc.description.degreeMaster of Scienceen
dc.format.extentvi, 68 leavesen
dc.format.mediumBTDen
dc.format.mimetypeapplication/pdfen
dc.identifier.otheretd-12162009-020318en
dc.identifier.sourceurlhttp://scholar.lib.vt.edu/theses/available/etd-12162009-020318/en
dc.identifier.urihttp://hdl.handle.net/10919/46252en
dc.language.isoenen
dc.publisherVirginia Techen
dc.relation.haspartLD5655.V855_1994.A845.pdfen
dc.relation.isformatofOCLC# 30505880en
dc.rightsIn Copyrighten
dc.rights.urihttp://rightsstatements.org/vocab/InC/1.0/en
dc.subject.lccLD5655.V855 1994.A845en
dc.subject.lcshRolling (Aerodynamics)en
dc.titleControl power requirements for the velocity vector rollen
dc.typeThesisen
dc.type.dcmitypeTexten
thesis.degree.disciplineAerospace Engineeringen
thesis.degree.grantorVirginia Polytechnic Institute and State Universityen
thesis.degree.levelmastersen
thesis.degree.nameMaster of Scienceen

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
LD5655.V855_1994.A845.pdf
Size:
1.89 MB
Format:
Adobe Portable Document Format
Download

Collections

Masters Theses