Characterization and Application of Wide-Band-Gap Devices for High Frequency Power Conversion

Files

TR Number

Date

2017-06-08

Journal Title

Journal ISSN

Volume Title

Publisher

Virginia Tech

Abstract

Advanced power semiconductor devices have consistently proven to be a major force in pushing the progressive development of power conversion technology. The emerging wide-band-gap (WBG) material based power semiconductor devices are considered as gaming changing devices which can exceed the limit of silicon (Si) and be used to pursue groundbreaking high-frequency, high-efficiency, and high-power-density power conversion.

The switching performance of cascode GaN HEMT is studied at first. An accurate behavior-level simulation model is developed with comprehensive consideration of the impacts of parasitics. Then based on the simulation model, detailed loss breakdown and loss mechanism analysis are studied. The cascode GaN HEMT has high turn-on loss due to the reverse recovery charge and junction capacitor charge, and the common source inductance (CSI) of the package; while the turn-off loss is extremely small attributing to unique current source turn off mechanism of the cascode structure.

With this unique feature, the critical conduction mode (CRM) soft switching technique is applied to reduce the dominant turn on loss and significantly increase converter efficiency. The switching frequency is successfully pushed to 5MHz while maintaining high efficiency and good thermal performance.

Traditional packaging method is becoming a bottle neck to fully utilize the advantages of GaN HEMT. So an investigation of the package influence on the cascode GaN HEMT is also conducted. Several critical parasitic inductance are identified, which cause high turn on loss and high parasitic ringing that may lead to device failure. To solve the issue, the stack-die package is proposed to eliminate all critical parasitic inductance, and as a result, reducing turn on loss by half and avoiding potential failure mode of the cascode GaN device effectively.

Utilizing soft switching and enhanced packaging, a GaN-based MHz totem-pole PFC rectifier is demonstrated with 99% peak efficiency and 700 W/in3 power density. The switching frequency of the PFC is more than ten times higher than the state-of-the-art industry product while it achieves best possible efficiency and power density. Integrated power module and integrated PCB winding coupled inductor are all studied and applied in this PFC.

Furthermore, the technology of soft switching totem-pole PFC is extended to a bidirectional rectifier/inverter design. By using SiC MOSFETs, both operating voltage and power are dramatically increased so that it is successfully applied into a bidirectional on-board charger (OBC) which achieves significantly improved efficiency and power density comparing to the best of industrial practice. In addition, a novel 2-stage system architecture and control strategy are proposed and demonstrated in the OBC system.

As a continued extension, the critical mode based soft switching rectifier/inverter technology is applied to three-phase AC/DC converter. The inherent drawback of critical mode due to variable frequency operation is overcome by the proposed new modulation method with the idea of frequency synchronization. It is the first time that a critical mode based modulation is demonstrated in the most conventional three phase H-bridge AC/DC converter, and with 99% plus efficiency at above 300 kHz switching frequency.

Description

Keywords

Gallium nitride, high frequency, soft switching, package, rectifier/inverter

Citation