Evaluation of the Aerodynamic and Acoustic Performance of a Novel Passive Bat Deterrent for Wind Energy Applications
| dc.contributor.author | Van Horn, Charles Anders | en |
| dc.contributor.committeechair | Alexander, William Nathan | en |
| dc.contributor.committeemember | Ross, Shane David | en |
| dc.contributor.committeemember | Borgoltz, Aurelien | en |
| dc.contributor.department | Aerospace and Ocean Engineering | en |
| dc.date.accessioned | 2025-12-23T09:00:20Z | en |
| dc.date.available | 2025-12-23T09:00:20Z | en |
| dc.date.issued | 2025-12-22 | en |
| dc.description.abstract | The growth of wind energy installations and the continued increase in turbine size over recent decades have contributed to a concerning rise in bat fatalities. Current mitigation strategies suffer from limitations, with curtailment decreasing energy production and active acoustic bat deterrents constrained by atmospheric attenuation, preventing full coverage of the rotor swept area. Passive ultrasonic deterrents integrated along the length of turbine blades offer a potential alternative, but their aerodynamic impact has not been thoroughly investigated. Implementation in the field requires an understanding of these devices to ensure they do not impose a significant penalty on turbine efficiency. This study evaluates the aerodynamic and acoustic performance of a novel passive bat deterrent design that utilizes resonant cavities exposed to airflow over the surface of an airfoil to generate noise. Two wind tunnel experiments were conducted across a range of flow speeds and angles of attack. The first investigated larger cavities designed to generate lower-frequency tones using direct lift, surface pressure, and acoustic measurements. The second tested smaller resonators targeting ultrasonic frequencies using surface pressure, wake pressure deficit, and acoustic recordings. The large cavities generated noise at approximately 10 kHz, though the acoustic performance was irregular at low freestream velocities, with some lower than expected frequencies and occasional lobes rather than tonal peaks appearing in the spectra. These resonators were also more efficient in deflecting the wind tunnel jet, leading to a drop in lift. The smaller cavities produced sound at around 23 kHz, with no risk of human audible noise pollution at lower frequencies. Lift reductions were on the order of 1% across the majority of flow conditions, and the small resonators decreased drag between 2% and 10% only at high angles of attack. Additionally, the aerodynamic impact of the resonators was less significant than that of an upstream trip, and the trip only decreased the acoustic response at high angles of attack. | en |
| dc.description.abstractgeneral | As wind energy continues to expand and wind turbines grow larger, the increasing number of bats killed by turbines has become an ecological concern. Current methods to minimize bat fatalities have drawbacks: shutting down turbines to limit the risk of collisions reduces energy production, and acoustic deterrents that emit high-frequency noise lose effectiveness over distance and cannot cover the entire area that modern turbine blades sweep. A new approach uses whistles that harness the airflow over the blades as they rotate to generate noise outside the human hearing range. These devices can be mounted along the length of the blades, but their aerodynamic impacts have not been thoroughly investigated. This study evaluates the aerodynamic and acoustic performance of a novel whistle design, or "passive deterrent." The deterrent consists of a cavity that produces noise as air flows over it. Two wind tunnel tests were performed, the first on a larger cavity and the second on a smaller version. In each experiment, aerodynamic forces were measured along with the acoustic response of the whistles. The larger cavity design produced noise at approximately 10 kHz, but exhibited irregular behavior at lower speeds, and it caused a reduction in produced lift. The smaller cavities generated noise at 23 kHz with no risk of human audible noise production. These cavities only reduced lift and drag by a few percent at certain flow conditions. Furthermore, the addition of surface roughness ahead of the cavities produced larger aerodynamic penalties than the cavities and only affected the acoustics at certain conditions. | en |
| dc.description.degree | Master of Science | en |
| dc.format.medium | ETD | en |
| dc.identifier.other | vt_gsexam:45377 | en |
| dc.identifier.uri | https://hdl.handle.net/10919/140542 | en |
| dc.language.iso | en | en |
| dc.publisher | Virginia Tech | en |
| dc.rights | In Copyright | en |
| dc.rights.uri | http://rightsstatements.org/vocab/InC/1.0/ | en |
| dc.subject | Aeroacoustics | en |
| dc.subject | Wind Energy | en |
| dc.subject | Bat Deterrent | en |
| dc.title | Evaluation of the Aerodynamic and Acoustic Performance of a Novel Passive Bat Deterrent for Wind Energy Applications | en |
| dc.type | Thesis | en |
| thesis.degree.discipline | Aerospace Engineering | en |
| thesis.degree.grantor | Virginia Polytechnic Institute and State University | en |
| thesis.degree.level | masters | en |
| thesis.degree.name | Master of Science | en |
Files
Original bundle
1 - 1 of 1