Optimization of edging and trimming operations for red oak lumber

Simple item page
dc.contributor.authorRegalado, Carmen de Castroen
dc.contributor.departmentForestry and Forest Productsen
dc.date.accessioned2014-03-14T21:48:09Zen
dc.date.adate2009-10-24en
dc.date.available2014-03-14T21:48:09Zen
dc.date.issued1991en
dc.date.rdate2009-10-24en
dc.date.sdate2009-10-24en
dc.description.abstractThis research project investigated the upgrading of edging and trimming operations for red oak lumber through computer-aided optimization. The main objective was to evaluate how lumber value recovered by actual hardwood operations compare with the maximum value obtainable through the optimization of edging and trimming. An optimization procedure was developed involving the use of an iterative computer program for finding optimum edging and trimming solutions. The hardwood lumber grading program developed by Klinkhachorn et.al. [1988] was incorporated into the procedure. Comparison of results with actual values indicated that only 63% to 80%, approximately, of the maximum theoretical value was obtained in the sawmills studied. Edging and trimming optimizing systems equipped with scanners that provide only wane information have been successfully applied in softwood lumber manufacturing. The second part of this study investigated the lumber value recovery that can be expected if a similar system were applied to hardwood edging and trimming, i.e., if optimization were based only on wane input. Based on the output of a computer optimization program that maximizes volume yield subject to wane limitations, it was found that for red oak boards, an average value of approximately 80% of the optimum can be recovered through the application of this procedure.en
dc.description.degreeMaster of Scienceen
dc.format.extentviii, 112 leavesen
dc.format.mediumBTDen
dc.format.mimetypeapplication/pdfen
dc.identifier.otheretd-10242009-020208en
dc.identifier.sourceurlhttp://scholar.lib.vt.edu/theses/available/etd-10242009-020208/en
dc.identifier.urihttp://hdl.handle.net/10919/45297en
dc.language.isoenen
dc.publisherVirginia Techen
dc.relation.haspartLD5655.V855_1991.R453.pdfen
dc.relation.isformatofOCLC# 23810424en
dc.rightsIn Copyrighten
dc.rights.urihttp://rightsstatements.org/vocab/InC/1.0/en
dc.subjectRed oaken
dc.subject.lccLD5655.V855 1991.R453en
dc.subject.lcshLumberen
dc.subject.lcshQuercus rubraen
dc.titleOptimization of edging and trimming operations for red oak lumberen
dc.typeThesisen
dc.type.dcmitypeTexten
thesis.degree.disciplineForestry and Forest Productsen
thesis.degree.grantorVirginia Polytechnic Institute and State Universityen
thesis.degree.levelmastersen
thesis.degree.nameMaster of Scienceen

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
LD5655.V855_1991.R453.pdf
Size:
4.9 MB
Format:
Adobe Portable Document Format
Description:
Download

Collections

Masters Theses