Gravity selector-enabled kenaf recirculation and reuse as a renewable ballasting agent for sludge settleability enhancement in a municipal wastewater secondary process: A real wastewater pilot-scale study

dc.contributor.authorRoy, Prantaen
dc.contributor.committeechairWang, Zhiwuen
dc.contributor.committeememberLiao, Jingqiuen
dc.contributor.committeememberFeng, Yimingen
dc.contributor.departmentBiological Systems Engineeringen
dc.date.accessioned2025-01-15T09:00:23Zen
dc.date.available2025-01-15T09:00:23Zen
dc.date.issued2025-01-14en
dc.description.abstractSludge densification can be achieved through granulation/densification, migrating carriers, ballasted flocculation, or a combination of these approaches. Hydrocyclone-enabled continuous flow densification has been applied for full-scale applications; however, it requires long startup times and, in some instances, results in poor stability of the densified floc. Migrating carriers hold promise to offset these disadvantages for continuous flow processes where reasonable feast-famine or plug flow conditions cannot be achieved while drawing on the strength of hydrocyclones to retain and return the ballasting agent. This idea was tested by dosing kenaf, a plant-based renewable migrating carrier in a pilot-scale plug flow reactor equipped with a gravity selector to mimic a hydrocyclone. Results showed that kenaf could gradually reduce the sludge volume index from 170 to 50 mL/g and increase zone settling velocity from 2.5 to 7 m/h over 110 days without compromising treatment performance. Because of the selective retention of the inert plant-based carrier represented as a volatile solid in the gravity selector underflow, a traditional SRT calculation based on mixed liquor volatile suspended solids tended to overestimate daily Waste Activated Sludge (WAS) requirements and resulted in active sludge inventory loss. An oxygen utilization rate-based method was developed and verified for easy SRT correction to avoid kenaf interference with the sludge wasting protocol. Denser kenaf incorporated into the sludge matrix during flocculant settling contributed to the settleability improvements. However, a lack of biofilm formation on the kenaf surface was observed even after 110 days of treatment is intriguing and different from other studies. Challenges with initial kenaf floating and interference with conventional SRT calculations were two significant lessons learned from this study, and countermeasures were provided accordingly. It was concluded that kenaf could work in synergy with gravimetric ballast separation, such as with a hydrocylone, for quick and sustainable sludge settleability improvements.en
dc.description.abstractgeneralImproving wastewater treatment involves making the sludge (the solid part of the waste) settle faster and more efficiently. This can be done in two main ways, i.e. forming dense, compact sludge particles or using materials to make the particles heavier so they settle quicker. A trendy method, known as "aerobic granulation," uses special equipment but has drawbacks, i.e., it takes a long time to get started, and the particles aren't very stable. Another method, "ballasted flocculation," shows promise because it can address these issues while still using the same equipment for reusing the added material. To test this hypothesis, we investigated using a natural material called kenaf, a plant-based product, to help improve sludge settling. We ran the experiment in a small-scale treatment system designed to mimic large-scale operations. Adding kenaf reduced the volume of sludge by over two-thirds and made it settle three times faster, and all these were achieved without affecting the wastewater treatment performance. However, using kenaf introduced some challenges. It made it harder to accurately measure how much sludge was being wasted daily, leading to an unexpected loss of sludge in the system. To fix this, we developed a novel, simple method to calculate sludge levels more accurately. We also found that kenaf worked well because it became part of the sludge, helping it settle faster, though it didn't let bacteria grow on its surface. Two key lessons emerged, and we suggested ways to deal with these problems. Overall, kenaf worked effectively with existing equipment to make sludge settle faster and more sustainably, offering a promising solution for wastewater treatment systems.en
dc.description.degreeMaster of Scienceen
dc.format.mediumETDen
dc.identifier.othervt_gsexam:42462en
dc.identifier.urihttps://hdl.handle.net/10919/124189en
dc.language.isoenen
dc.publisherVirginia Techen
dc.rightsIn Copyrighten
dc.rights.urihttp://rightsstatements.org/vocab/InC/1.0/en
dc.subjectBallasting; kenaf; settleability; OUR; SVI; zone settling velocityen
dc.titleGravity selector-enabled kenaf recirculation and reuse as a renewable ballasting agent for sludge settleability enhancement in a municipal wastewater secondary process: A real wastewater pilot-scale studyen
dc.typeThesisen
thesis.degree.disciplineBiological Systems Engineeringen
thesis.degree.grantorVirginia Polytechnic Institute and State Universityen
thesis.degree.levelmastersen
thesis.degree.nameMaster of Scienceen

Files

Original bundle
Now showing 1 - 2 of 2
Loading...
Thumbnail Image
Name:
Roy_P_T_2025.pdf
Size:
1.76 MB
Format:
Adobe Portable Document Format
Loading...
Thumbnail Image
Name:
Roy_P_T_2025_support_1.pdf
Size:
9.22 KB
Format:
Adobe Portable Document Format
Description:
Supporting documents

Collections