Polyimide-Organosilicate Hybrid Materials: Part I: Effects of Annealing on Gas Transport Properties; Part II: Effects of CO2 Plasticization
Files
TR Number
Date
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
The objective of this study was to examine the effects of annealing polyimide-organosilicate hybrid membranes on gas transport. In addition, the effects of carbon dioxide pressure on the gas transport of unannealed polyimide-organosilicate hybrid membranes were evaluated. The membranes in both studies consisted of sol-gel derived organosilicate domains covalently bonded to a 6FDA-6FpDA-DABA polyimide using partially hydrolyzed tetramethoxysilane (TMOS), methyltrimethoxysilane (MTMOS) or phenyltrimethoxysilane (PTMOS).
The first study subjected the hybrid membranes to a 400°C annealing process to enhance gas separation performance by altering the organosilicate structures. The hybrid membranes were evaluated before and after annealing using pure gases (He, O₂, N₂, CH₄, CO₂) at 35°C and a feed pressure of 4 atm. The permeability for most of the membranes increased 200-500% after the annealing process while the permselectivity dropped anywhere from 0 to 50%. The exceptions were the 6FDA-6FpDA-DABA-25 22.5 wt% TMOS and MTMOS hybrid membranes, both of which exhibited increases in the CO₂ permeability and CO₂-CH₄ permselectivity. The increase in permeation was attributed to increases in the free volume and enhanced segmental mobility of the chain ends resulting from the removal of sol-gel condensation and polymer degradation byproducts.
For the second study, the transport properties of four membranes, 6FDA-6FpDA polyimide, 6FDA-6FpDA-DABA polyimide, MTMOS and PTMOS-based hybrid materials, were characterized as a function of feed pressure to evaluate how the hybrid materials reacted to CO₂ plasticization. Steady-state gas permeation experiments were performed at 35°C using pure CO₂ and CH₄ gases at feed pressures ranging from 4 to 30 atm. All four materials exhibited dual mode sorption up to feed pressures of 17 atm, at which point the effects of CO₂ plasticization were observed.