High Frequency, High Current Integrated Magnetics Design and Analysis

Simple item page
dc.contributor.authorReusch, David Claytonen
dc.contributor.committeechairLee, Fred C.en
dc.contributor.committeememberWang, Fei Freden
dc.contributor.committeememberXu, Mingen
dc.contributor.departmentElectrical and Computer Engineeringen
dc.date.accessioned2014-03-14T20:46:47Zen
dc.date.adate2006-11-17en
dc.date.available2014-03-14T20:46:47Zen
dc.date.issued2006-10-13en
dc.date.rdate2006-11-17en
dc.date.sdate2006-10-17en
dc.description.abstractThe use of computers in the modern world has become prevalent in all aspects of life. The size of these machines has decreased dramatically while the capability has increased exponentially. A special DC-DC converter called a VRM (Voltage Regulator Module) is used to power these machines. The VRM faces the task of supplying high current and high di/dt to the microprocessor while maintaining a tight load regulation. As computers have advanced, so have the VRM's used to power them. Increasing the current and di/dt of the VRM to keep up with the increasing demands of the microprocessor does not come without a cost. To provide the increased di/dt, the VRM must use a higher number of capacitors to supply the transient energy. This is an undesirable solution because of the increased cost and real estate demands this would lead to in the future. Another solution to this problem is to increase the switching frequency and control bandwidth of the VRM. As the switching frequency increases the VRM is faced with efficiency and thermal problems. The current buck topologies suffer large drops in efficiency as the frequency increases from high switching losses. Resonant or soft switching topologies can provide a relief from the high switching loss for high frequency power conversion. One disadvantage of the resonant schemes is the increased conduction losses produced by the circulating energy required to produce soft switching. As the frequency rises, the additional conduction loss in the resonant schemes can be smaller than the switching loss encountered in the hard switched buck. The topology studied in this work is the 12V non-isolated ZVS self-driven presented in [1]. This scheme offered an increased efficiency over the state of the art industry design and also increased the switching frequency for capacitor reduction. The goal of this research was to study this topology and improve the magnetic design to decrease the cost while maintaining the superior performance. The magnetics used in resonant converters are very important to the success of the design. Often, the leakage inductance of the magnetics is used to control the ZVS or ZCS switching operation. This work presents a new improved magnetic solution for use in the 12V non-isolated ZVS self-driven scheme which increases circuit operation, flexibility, and production feasibility. The improved magnetic structure is simulated using 3D FEA verification and verified in hardware design.en
dc.description.degreeMaster of Scienceen
dc.identifier.otheretd-10172006-163100en
dc.identifier.sourceurlhttp://scholar.lib.vt.edu/theses/available/etd-10172006-163100/en
dc.identifier.urihttp://hdl.handle.net/10919/35420en
dc.publisherVirginia Techen
dc.relation.haspartReusch_thesis_11_1_06.pdfen
dc.rightsIn Copyrighten
dc.rights.urihttp://rightsstatements.org/vocab/InC/1.0/en
dc.subjectvoltage regulator moduleen
dc.subjectintegrated magneticsen
dc.subjectleakage inductanceen
dc.subjectself-drivenen
dc.titleHigh Frequency, High Current Integrated Magnetics Design and Analysisen
dc.typeThesisen
thesis.degree.disciplineElectrical and Computer Engineeringen
thesis.degree.grantorVirginia Polytechnic Institute and State Universityen
thesis.degree.levelmastersen
thesis.degree.nameMaster of Scienceen

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Reusch_thesis_11_1_06.pdf
Size:
2.09 MB
Format:
Adobe Portable Document Format
Download

Collections

Masters Theses