Non-linear finite element analysis of steel plate tension members

Abstract

In the American Institute of Steel Construction (AISC) LRFD specification, the shear lag coefficient for plate members is dependent on only the ratio of the welding length to the plate width. To determine how this ratio influences the shear lag coefficient and whether there are other factors that should be considered, a finite element investigation was conducted. Experimental data from a previous study conducted at Virginia Tech was used for comparison with the analytical model.

Upon completion of the verification study, several parameters were investigated to determine their influence on the shear lag coefficient. These included the effects of weld length, eccentric load and imperfection created by the welding process. Shear lag coefficients were determined from the finite element analyses and compared with the AISC specification values.