Design of a Radial Mode Piezoelectric Transformer for a Charge Pump Electronic Ballast with High Power Factor and Zero Voltage Switching
dc.contributor.author | Huang, Weixing | en |
dc.contributor.committeechair | Chen, Dan Y. | en |
dc.contributor.committeemember | Huang, Alex Q. | en |
dc.contributor.committeemember | Lindner, Douglas K. | en |
dc.contributor.department | Electrical and Computer Engineering | en |
dc.date.accessioned | 2014-03-14T20:34:00Z | en |
dc.date.adate | 2003-05-01 | en |
dc.date.available | 2014-03-14T20:34:00Z | en |
dc.date.issued | 2003-04-21 | en |
dc.date.rdate | 2004-05-01 | en |
dc.date.sdate | 2003-04-22 | en |
dc.description.abstract | In a conventional electronic ballast for a fluorescent lamp, inductor-capacitor-transformer tank circuit is used. A Piezoelectric Transformer (PT) can potentially be used to replace such a tank circuit to save space and cost. In the past, ballast design using a PT requires selecting a PT from available samples which are normally not matched to specific application and therefore resulting in poor performance. In this thesis, a design procedure was proposed for designing a PT tailored for a 120-V 32-W electronic ballast with high power factor, high efficiency and Zero-Voltage-Switching (ZVS) of the inverter transistors that drive the lamp. This involves selection of PT materials, determination of geometries and the number of physical layers of the PT. A radial mode piezoelectric transformer prototype based on this design process was fabricated by Face Electronics Inc. and was tested experimentally, the results showed that the ballast using this custom-made PT achieved high power factor, Zero-Voltage-Switching and a 83% overall efficiency. | en |
dc.description.degree | Master of Science | en |
dc.identifier.other | etd-04222003-083524 | en |
dc.identifier.sourceurl | http://scholar.lib.vt.edu/theses/available/etd-04222003-083524/ | en |
dc.identifier.uri | http://hdl.handle.net/10919/31818 | en |
dc.publisher | Virginia Tech | en |
dc.relation.haspart | whuangthesisFinal.pdf | en |
dc.rights | In Copyright | en |
dc.rights.uri | http://rightsstatements.org/vocab/InC/1.0/ | en |
dc.subject | PFC | en |
dc.subject | Electronic Ballast | en |
dc.subject | Piezoelectric Transformer | en |
dc.title | Design of a Radial Mode Piezoelectric Transformer for a Charge Pump Electronic Ballast with High Power Factor and Zero Voltage Switching | en |
dc.type | Thesis | en |
thesis.degree.discipline | Electrical and Computer Engineering | en |
thesis.degree.grantor | Virginia Polytechnic Institute and State University | en |
thesis.degree.level | masters | en |
thesis.degree.name | Master of Science | en |
Files
Original bundle
1 - 1 of 1