Investigation of Control Effectors for Ducted Fan VTOL UAVs

dc.contributor.authorHarris, Charles Richard Jr.en
dc.contributor.committeechairNg, Wing Faien
dc.contributor.committeememberDevenport, William J.en
dc.contributor.committeememberBurdisso, Ricardo A.en
dc.contributor.departmentMechanical Engineeringen
dc.date.accessioned2014-03-14T20:42:32Zen
dc.date.adate2007-08-20en
dc.date.available2014-03-14T20:42:32Zen
dc.date.issued2007-06-27en
dc.date.rdate2010-10-27en
dc.date.sdate2007-08-02en
dc.description.abstractDucted fan VTOL UAVs are currently being designed for use by the Army for surveillance and reconnaissance in the battlefield. The vehicle tested in this research is part of the Honeywell MAV program. Able to be carried in a backpack by a single soldier, it has a duct diameter of 11.5-in. and weighs approximately 20-lbs at takeoff. It is designed for flight up to 50-knots with fan speeds varying between 5000 and 8500 RPM. Reynolds numbers, based on the duct diameter, were on the order of Re = 0.96 x 106 to 4.6 x 106. Various control effectors were mounted to the vehicle and tested for maximum control authority to reduce the nose-up pitch moment created during forward flight or with crosswinds present. Static and wind tunnel tests were conducted to measure each control effector's performance. Box vanes, mounted downstream of the duct, utilized four assemblies, each with three vanes and one flap. This configuration showed adequate results in generating a nose-down pitch moment. Duct deflectors, mounted on the windward strut upstream of the duct, reduced the windward lift produced by both the fan and duct, resulting in a nose-down pitch moment. Opposed vanes, utilizing two vanes and flaps for each of the four assemblies, were designed with the same surface area as the box vanes. With each pair capable of independent vane movement, the opposed vanes were tested with the vanes rotating in tandem for a basic elevator deflection and with the leading edges touching, disrupting the flow at the duct exit. Opposed vanes combined the capabilities of the box vanes and duct deflector. Results show that the opposed vanes were the most practical control effector, offering the most control authority for maximum nose-down pitch moment (up to 80% better) with minimal loss in thrust.en
dc.description.degreeMaster of Scienceen
dc.identifier.otheretd-08022007-135059en
dc.identifier.sourceurlhttp://scholar.lib.vt.edu/theses/available/etd-08022007-135059/en
dc.identifier.urihttp://hdl.handle.net/10919/34312en
dc.publisherVirginia Techen
dc.relation.haspartThesis_RH.pdfen
dc.rightsIn Copyrighten
dc.rights.urihttp://rightsstatements.org/vocab/InC/1.0/en
dc.subjectcontrol effectoren
dc.subjectuaven
dc.subjectasymmetric liften
dc.subjectducted fanen
dc.titleInvestigation of Control Effectors for Ducted Fan VTOL UAVsen
dc.typeThesisen
thesis.degree.disciplineMechanical Engineeringen
thesis.degree.grantorVirginia Polytechnic Institute and State Universityen
thesis.degree.levelmastersen
thesis.degree.nameMaster of Scienceen

Files

Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
Thesis_RH.pdf
Size:
2.54 MB
Format:
Adobe Portable Document Format

Collections